Actichem PolyProp Plus Carpet Cleaner

Professional Polypropylene Carpet Cleaning Prespray

Actichem PolyProp Plus is a professional carpet-cleaning prespray specially formulated for olefin (polypropylene) carpet fibres. Its advanced, double-strength cleaning chemistry targets oily soils, tracked-in grime, particulate contamination and filtration soiling, helping professional cleaners achieve effective soil release without relying on harsh, highly alkaline cleaning agents.

Designed for demanding carpet-cleaning applications, PolyProp Plus is particularly useful for commercial, hospitality and domestic traffic areas, as well as polypropylene carpets affected by oils, food soils, general grime and filtration soil. Actichem also identifies it as suitable for challenging applications such as fire restoration and air-conditioning diffuser filtration soiling.

🧼 What This Product Does

PolyProp Plus works as a pre-treatment solution before hot water extraction. Its soil-release chemistry helps penetrate and loosen oily and tracked-in soils from polypropylene fibres, suspending contamination so it can be effectively removed during the extraction process.

Polypropylene carpets can hold oily soils and may develop dull or grey appearances. Actichem’s formulation is designed to help overcome these common cleaning challenges, while pairing PolyProp Plus with Rinse Pro can help encapsulate remaining soil and reduce wicking and greying after cleaning.

📋 Product Specifications

The current Actichem product page confirms the AP986 code, 5 L and 20 L pack sizes, 1:32–1:64 dilution range and polypropylene carpet application.

✨ Key Benefits

• 🧼 Specially formulated for polypropylene carpets
• 🛢️ Helps release oily and tracked-in soils
• 🚗 Effective on heavy traffic-lane contamination
• 🌫️ Helps address filtration soiling
• 🔥 Suitable for fire restoration applications
• ✨ Helps reduce dulling and greying
• 💧 Concentrated 1:32–1:64 dilution
• 🌿 Low-odour formulation
• 🔄 Works effectively with Rinse Pro during extraction
• 💰 Economical for professional carpet-cleaning operations

⚙️ Professional Application

For pump-up sprayers, dilute 15–30 mL per litre of water, depending on soil conditions. Thoroughly vacuum the carpet before application, then prespray evenly without allowing the solution to dry. Agitate the carpet and allow approximately 5–10 minutes of dwell time before hot-water extraction. Actichem recommends using Rinse Pro for the extraction rinse, followed by air movement or ventilation to assist drying where required.

⚠️ Important

Always pre-test an inconspicuous area for fibre and dye sensitivity. Actichem advises that PolyProp Plus should not be used on stain-resistant carpets except in restoration situations. It is specifically designed for olefin/polypropylene carpets, so the fibre type should be identified before application.