Price range: $63.26 through $236.86
Taxes included. Shipping calculated at checkout
100% secure checkout
Trusted by professionals
Orders dispatched daily
30-day return policy
AGAR Ultrastrip Floor Polish Remover is a concentrated floor polish remover designed to dissolve hardened polish, wax and sealer build-ups before recoating. Its low-foaming, easy-rinsing formula helps reduce scrubbing time and prepare floors for restoration. Available in 1L, 5L and 20L containers.
CLEANING MACHINERY
CLEANING CHEMICALS
CLEANING CHEMICALS
CLEANING CHEMICALS
CLEANING CHEMICALS✨ Restore tired floors with AGAR Ultrastrip!
AGAR Ultrastrip is a super-concentrated floor polish remover designed to break down hardened layers of floor polish, wax and sealer so they can be removed before recoating. Its powerful stripping action helps prepare floors for a fresh finish while reducing the amount of mechanical scrubbing needed on suitable surfaces.
Ultrastrip penetrates old polish and sealer films, loosening accumulated coatings and heavy build-ups. Its low-foaming formula is designed to rinse away easily, leaving the floor clean and ready for recoating. With a low concentration of volatile ingredients, it is practically odourless during use, helping make floor-restoration work more comfortable for cleaning teams.
Use Ultrastrip to remove existing floor finishes before applying new polish or sealer. AGAR states that it will not affect metal, vinyl tile or wood surfaces. Rubber floors must be stripped using a dilution of at least 1:20, while sheet vinyl requires careful use with thorough dilution. Always test an inconspicuous area and check the flooring manufacturer’s recommendations before starting.
Designed for professional floor restoration, Ultrastrip is useful when routine maintenance can no longer remove worn coatings. Stripping back the old finish helps provide a clean base for applying fresh floor polish or sealer, supporting a better refinishing result.
For typical stripping, dilute one part Ultrastrip in 10–20 parts cold water. For heavier polish build-up, stronger concentrations up to 1:3 may be used, except on rubber and sheet vinyl, which require at least 1:20 dilution. Apply generously and keep the floor wet for 10–15 minutes. Scrub using a black pad under a slow-speed machine, collect the solution and rinse thoroughly with clean hot water. Porous floors require a flood rinse followed by wet vacuuming or mopping.
| Specification | Details |
|---|---|
| Brand | AGAR |
| Product Name | Ultrastrip |
| Product Type | Floor Polish Remover |
| Product Codes | ULT5, ULT20 |
| Available Sizes | 5L and 20L |
| Appearance | Transparent, colourless liquid |
| Odour | Mild, practically odourless |
| pH | 11.5–14.0 |
| Foam Level | Low |
| Flammability | Non-flammable |
Important safety note: Ultrastrip is strongly alkaline and classified as corrosive. Wear protective gloves, clothing and eye or face protection, and follow the current Safety Data Sheet. Keep away from children and never mix with other cleaning chemicals.
Suitable For:
- Commercial office buildings
- School maintenance facilities
- Hospital floor maintenance
- Shopping centre facilities
- Aged care facilities
- Government office buildings
- Retail commercial premises
- Hospitality maintenance teams
- Professional cleaning contractorsBest For:
- Removing old polish
- Stripping hardened sealers
- Removing wax coatings
- Preparing floors for recoating
- Removing heavy build-ups
- Restoring polished floors
- Reducing machine scrubbing
- Removing stubborn coatings
Typical Applications:
- Polished vinyl floors
- Timber floor finishes
- Stone floor finishes
- Ceramic tile finishes
- Rubber flooring stripping
- Sheet vinyl stripping
- Floor sealer removal
- Wax polish removal
- Hardened coating removalHow to Use:
1. Read the current product label and Safety Data Sheet (SDS) before use.
2. Wear chemical-resistant gloves, protective clothing and eye or face protection. AGAR Ultrastrip is corrosive and can cause severe skin burns and eye damage.
3. For standard stripping, dilute 1 part Ultrastrip in 10–20 parts cold water.
4. For light polish build-up, use a 1:10 dilution; for medium build-up, use 1:7; for heavy build-up, use 1:5; and for very heavy build-up, use 1:3.
5. For rubber or sheet vinyl floors, use a dilution of at least 1 part product in 20 parts water. Test an inconspicuous area first.
6. Mop the solution generously over the floor and allow it to work for 10–15 minutes.
7. Keep the floor wet throughout the activation period. Apply additional solution if necessary and do not allow it to dry.
8. Scrub the floor using a black stripping pad fitted to a slow-speed floor machine. Pay particular attention to edges where sealer build-up may be heavier.
9. Mop up or wet-vacuum the loosened polish and stripping solution.
10. Rinse thoroughly with clean hot water to remove remaining stripper and dissolved floor finish.
11. Flood-rinse porous floors with clean hot water, then wet-vacuum or mop up the solution to remove stripper from the pores.
12. Allow the floor to dry completely before applying a new floor sealer or polish.
13. Use diluted solution within 24 hours of preparation.AGAR Ultrastrip removes old floor polish, wax and strippable sealer coatings, preparing floors for a fresh protective finish.
It is suitable for many resilient commercial floor surfaces including vinyl, linoleum, terrazzo and sealed concrete. Always test in an inconspicuous area before full application.
Yes, it performs well in both soft and hard water conditions, making it suitable for all Australian regions.
Yes, it is compatible with floor scrubbers, polishers, and manual mop applications, offering flexibility for different cleaning needs.
CLEANING CHEMICALS
CLEANING CHEMICALS
CLEANING CHEMICALS
SPECIALTY CLEANERS
CLEANING CHEMICALS
Get in touch with us using the enquiry form or contact details below.
Reviews
There are no reviews yet.