🛢️ AGAR Oil Stain Remover 10KG

Professional Solution for Deeply Embedded Oil Stains

AGAR Oil Stain Remover is a specialised absorbent paste designed to tackle stubborn oil stains that have penetrated deeply into porous concrete, stone and tiled surfaces. Developed for situations where conventional detergents and degreasers may remove surface oil but leave contamination embedded within the pores, this product uses the poultice method to draw the oil back out of the affected surface. It is particularly suited to persistent stains that continue to reappear after ordinary cleaning.

🔧 Designed for Deep Oil Contamination

Oil from vehicles, machinery and food products can soak into porous surfaces and create dark, difficult-to-remove marks. AGAR explains that this can occur with engine oil, hydraulic fluid, brake fluid, cooking oil, fat and dripping. When only the surface oil is removed, the oil remaining deeper within the pores can migrate back toward the surface. Oil Stain Remover is specifically designed to address this embedded contamination rather than simply cleaning the visible stain.

🧪 Poultice Action

The product is a white absorbent paste containing mineral turpentine and is supplied ready to apply without mixing. The paste is spread over the dry stained area and left to dry. During this process, the mineral turpentine wets and dissolves the embedded oil, while evaporation draws the dissolved contamination into the absorbent powder component. Once completely dry, the remaining material can be scraped away and collected before the treated surface is cleaned.

✨ Key Benefits

🧱 Suitable Surface Types

AGAR states that Oil Stain Remover can be used on concrete, bluestone, granite, ceramic tiles, terracotta, marble, limestone and terrazzo. This makes it useful for treating oil contamination across workshops, garages, commercial facilities, maintenance areas and other locations where porous hard surfaces have become heavily stained.

📦 Product Information

AGAR recommends applying approximately 2–3 mm of paste over the dry stain and allowing it to dry, which normally takes around 8–12 hours. The dried residue is then removed before the area is scrubbed with a suitable detergent.

AGAR Oil Stain Remover 10KG provides a targeted professional approach for removing deeply embedded oil contamination from suitable porous hard surfaces, particularly where standard cleaning methods have proven insufficient.